§ 26-256. Testing.
(a)
Test required. Each reduced pressure principle backflow preventor assembly and double check valve assembly shall be tested immediately after installation, after repairs of any kind, and annually. Any backflow preventor found to be nonfunctional shall be replaced and re-tested within fourteen (14) days of initial test.
(b)
Inspections after installation of devices. The department shall inspect all backflow devices after installation to insure proper installation and device. Cost and procedure of inspection will be determined by the department.
(c)
Annual inspection. Each high hazard backflow preventor device shall be inspected and tested at least annually.
(d)
Certified testers. Only testers certified by the Mississippi State Department of Health shall test backflow preventors located in department's water system.
(e)
Notification. The department will notify the owner of each backflow preventor sixty (60) days prior to due date that the backflow preventor is due to be tested.
(Ord. of 11-16-99, §§ 6—6.4; Ord. of 1-3-02, §§ 6—6.5)